CELLECO.lix for PC ver 6.0

focuscon

3 z& ^, x" d6 T4 ~" t  u2 A" e# V
转自： ExtendSim官方论坛
* b& D. e7 \3 T8 e+ ]! R$ pCleaner + Pump updated for FlowMac's time unit for a grade, typically 1 year.
Cleaner w/o pump blocks upgraded for better functionallity.
& W$ B) y/ e* h: i" nOlder upgrades:
-FRU block had an usererror message during InitSim - The Fibermizer block has a script to automatically replace it with the improved Fiber Recovery Units block. This replace function is automatic - when opening the dialog of the Fibermizer block. Please check the connection lines as they might not be ideally drawn! - Update values located in the tab:
  x! U! V- L6 A* f2 ]Pump data and Tracers tab
: d8 w. k1 \+ {# G1 x( @; b, min block:
Celleco LC Cleaner + Pump - Blocks updated to handle FlowMac's automatic dimension change in the Licence block under Intisim. - Disc filter now as a signal function for on/off operation during a simulation, and later can be upgraded for rpm control.
- All obsolete blocks have been pulled out of Celleco.lix and moved to a new library: CELLECO-CANCEL.lix that can be found here as well.
-Tracer to follow Filler did not work in the Disc Filter block. Fixed 5/28/08
-Stand-pipe block added to be used with Celleco cleaners for example.
- Upgraded information regarding what do to in the Disc Filter when opening up an existing model containing the Disc Filter for the first time in ver 6.
- Fixed a display value error in the cleaners- did not interfere with any simulations, only a display value for Combi cleaners.
& u. ?' c" T3 w2 v: w- LC Cleaner now shows the flow per cleaner when simulating with a Current Installation.
- New higher capacity for the RT-HP cleaners. If you have simulated with this cleaner already, re-select the model in the pop-up menu to get the new higher capacity per cleaner.
- DeltaTime bugs worked out and a tracer error in the disc filter.
- All blocks are are now Fractions and KraftMac ready.
; _8 I+ t8 K6 {6 d- Only 2 cleaner blocks: with and without pump. The block will simulate all types of cleaners: Forward, Reverse, Parallel Flow and Combi cleaners This Celleco.lix will only work together with the FlowMac application and Extend version 6 and 7. :-) bengt.eriksson@glv.com